Hi, so freshly my washing maker stopped draining and spinning. I know the motor works fine, together it agitates fine, likewise the lid switch functions fine. Once it access time the spin/drain cycle the will simply click.
You are watching: Ge washer agitates but won t spin
It"s a belt moved setup, belt checks out fine, I"m leaning towards a pump, as it will gravity drainpipe when unplugged, but I"m not sure just how to check it, and also I don"t want to just start throwing components at it.
Thanks in advance!
I need help!! I have a Haier Rwt350aw (top loader, belt driven) that agitates and drains (most the time) and spins sometimes. In ~ first, it was making a weird noise. I ended up changing the drain pump (propeller come loose) that drained and also worked because that a tiny little bit an climate would protect against at the rotate cycle (no spinning) and also stay there. I readjust the computer system (for lack of a better word) and still nothing. The motor functions fine. I"m beginning to think it might be the clutch (i have the right to usually fix things but this has thrown me because that a loop) ns leave it uplugged and it will work occasionally once ns plug it back in. I"ve spent a bit of money ~ above this device and the still doesnt work. AHHHH!!!!
I have actually a GE washer ns tested the motor and also door switch they room both working fine yet it will certainly not turn or agitate as soon as on any fill cycle what else might be the problem
I have a GE washer, optimal load. Has constantly worked good (almost 20 years) and also looks brand new. Last week started making a an extremely weird noise during rinse. Noise stopped throughout spin and wash was fine. Yesterday, PROBLEM. It filled up and also agitated fine. However would not drain or spin. Once I relocated dial come the to wash cycle, it agitated some an ext (but still v wash water). Ns couldn"t do anything with it, messing with dial and also stuff for this reason I had to shut it off. My garments are quiet in there and also so is every the water! No draining in ~ all!
First north it v what even you can check the pump if no clogged and also check the clucth! i am certain by now you most have done something however let us know what to be the problem!
My washer the motor occupational fine, change the water yet when it rinse it do not spin during rinsing what have the right to be the problem. The pump readjust the water just fine, however spin the machine.
show 1 an ext comment
add a comment
Cancel post comment
Most helpful Newest oldest
The typical issue v won"t spin and won"t drain is the lid switch. That"s what I would go because that first.
Here"s the service manual on your machine: http://www.manualslib.com/manual/895199/...
Here"s whereby to get parts: http://www.searspartsdirect.com/model-nu...
Most Frequent reasons for Washer won"t drain
Sometimes, small objects or articles of clothes can get captured in the drainpipe pump. To identify if something is impede the drain pump, remove the drain pump and also check the pump for obstructions. If the drainpipe pump is clear of obstructions, yet is quiet noisy throughout the drainpipe cycle, replace the drain pump.
Clogged Pump or Hose
Sometimes, socks and other tiny articles of apparel can gain into the drain system and clog the pump water tap or the pump itself. Eliminate the hoses from the pump and check for any kind of obstructions.
Lid switch Assembly
The lid switch assembly prevents the washer native spinning once the lid is open. If the lid move assembly fails, the washer will certainly not drain. To determine if the lid switch assembly is defective, use a multimeter to test every of the lid switches because that continuity. If a lid move does not have actually continuity, replace it.
Most Frequent reasons for Washer won"t spin
Lid move Assembly
The lid switch assembly avoids the washer native spinning when the lid is open. If the lid switch assembly fails, the washer will certainly not spin. To determine if the lid switch assembly is defective, use a multimeter to check the lid switch for continuity. If the lid switch does not have actually continuity, change it.
The motor coupling connects the engine to the washer transmission. If the washer is overloaded, the engine coupling will certainly fail in stimulate to protect both the motor and transmission. The engine coupling can additionally fail because of normal wear. Examine the motor coupling to determine if it is broken. If the motor coupling is broken, replace it.
See more: Assassination Classroom Season 2 Episode 15 English Sub, Assassination Classroom 2 Episode 15 English Sub
Inspect the drive belt to recognize if the is broken or if that is loose on the pulleys. If the drive belt is damaged or loose, replace it.